Wood Handling Crane

• Certification: CE, ISO9001
• Condition: New
• Maximum Lifting Weight: <20t
• Maximum Lifting Height: >40m
• Operation Form: Remote Control
• Main Girder Form: Double Girder
• Model NO.: Wood Handling Crane
• Transport Package: Naked
• Specification: 26*31.5*50 m
• Trademark: SAINTWAH
• Origin: Beijing
• HS Code: 842619300
• Production Capacity: 10000

Product Description

Wood Handling Crane

 

• Product:Gantry Crane
• Model:MG
• Capacity:66t
• Application:Wood timber handling at paper mill

Overview
 

In November 2017, the MG66t wood handling gantry crane manufactured by Weihua Group was shipped to Russia and completed the installation, which works with the timber loader manufactured by the German Sunni Bergen Group at paper mill. The crane not only needs to meet the requirements of low temperature environment, but also fully matches the performance of the Sunni Bergen loader, and satisfies the stability and balance of the loader arm length, lifting and 360 degree rotation in the working range. And the electrical control system of the crane should be docked with the electrical control system of the loader to complete the work.

The customer's high-tech standards also put forward higher requirements for Weihua. Weihua strictly controlled each weld seam according to the process requirements, and the whole crane was subjected to ultrasonic weld flaw detection, and the connection chassis of the loader and the trolley was carried out at the installation site with precise connection. In the extreme environment and strict requirements, it is a new challenge and a huge test for our products.

Features

Features of Rail Type Gantry Crane for Beam Hoisting:
1. With special spreader;
2. Two cranes, two trolley, and Max. lifting height: 30m;
3. The concrete beam is parallel to crane rail;
4. Max. wheel load is 22t while lifting 900t beam;
5. Carry out 90°steering on straight and horizontal rails;
6. 4 points hoisting, 3 points balancing to ensure wire rope balancing and accurate landing;
7. Trolley adopts hydraulic push pole to realize different beam hoisting to save cost;
8. Total 4 winch trolley, which realizes drive separately, 2-2 drive or 4 simultaneous drive.

For Beam Moving:
Gantry crane for beam moving is mainly used for passenger railroad construction for concrete beam moving. Users can use 2 gantry cranes (500t, 450t) or 1 gantry crane (1,000t, 900t) with 2 lifting points to handle beams. There are 2 type for crane traveling: tire type and rail type.

The crane traveling, steering and hoisting of tire type gantry crane are all driven by hydraulic, which can realize traveling straight, oblique and horizontal, etc. Features of tire type gantry crane: Strong adaptability, high working efficiency, small footprint, need no rails, etc. Thus it is widely used for high speed railway construction for beam lifting, moving and loading.

Rail mounted gantry crane for beam hoisting is usually for lifting railway beams within 1,000t, which is driven by generating units on it. This crane travels on rails with 2 directions: straight and horizontal.

Features of Rail Type Gantry Crane for Beam Moving:
1. With special spreader;
2. Two cranes, two trolley, and Max. lifting height: 12m;
3. The concrete beam is parallel to crane rail;
4. Max. wheel load is 22t while lifting 900t beam;
5. Carry out 90°steering on straight and horizontal rails;
6. 4 points hoisting, 3 points balancing to ensure wire rope balancing and accurate landing;
7. Trolley adopts hydraulic push pole to realize different beam hoisting to save cost;
8. Total 4 winch trolley, which realizes drive separately, 2-2 drive or 4 simultaneous drive.

Specifications

Lifting Capacity		Single	t	450 (without spreader)
		Double	t	450+450
Span			m	38
Lifting Height			m	30
Tracks Center Distance			m	1,500
Speed	Hoisting		m/min	0.05 ~ 0.5 ~ 1 (no load)
	Trolley			0.2 ~ 2 ~ 4 (no load)
	Crane			0.5 ~ 5 ~ 10 (no load)
Electric Hoist	Model			CD1 16-30D
	Lifting Capacity		t	16
	Lifting Speed		m/min	3.5
	Traveling Speed			20
	Lifting Height		m	28.5
	Work Duty			A3
Steel Track Recommended				P50, P60
Max. Wheel Load			KN	360
Work Duty				A5
Total Weight			t	410
Total Power			KW	175
Power Source				3P, AC, 50Hz, 380V

 

 

Data Sheet of Gantry Crane for Beam Moving:

 

Lifting Capacity		t	900 (without spreader)
Span		m	38.5
Lifting Height		m	12
Tracks Center Distance		m	1,200
Speed	Hoisting	m/min	0.05 ~ 0.5 ~ 1 (no load)
	Trolley		Hydraulic push rod
	Crane		1 ~ 10 ~ 12 (no load)
Electric Hoist	Model		WH164 20t-12D
	Lifting Capacity	t	20
	Lifting Speed	m/min	3.3
	Traveling Speed		14
	Lifting Height	m	12
	Work Duty		A3
No Load Steering			90°
Wheel Base		m	16
Concrete Beam		m	20, 24, 32
Steel Track Recommended			P50, P60
Max. Wheel Load		KN	225
Work Duty			A3
Total Weight		t	505
Total Power		KW	259
Power Source			300KW