Frac Fluid Heating Unit Efficient Hot Oil and Water Equipment Completion & Stimulation Equipment

• After-sales Service: Provided
• Warranty: 1 Year or 2000hours
• Manufacturing Process: Casting
• Surface Treatment: Sand Blast
• Operation Pressure: Vacuum
• Material: Cast Steel
• Model NO.: Frac Fluid Heating Unit
• Transport Package: Skid
• Specification: 8, 350 x 2, 400 x 3, 000 mm
• Trademark: SAINTWAH
• Origin: Saintwah Inc.
• HS Code: 8207801000
• Production Capacity: 10000

Product Description

Frac Fluid Heating Unit

 

This hot water unit has a diesel-fired burner, heat exchanger, steel heater, and automatic burner controls. It helps circulate hot fluids into production wells, flushing of flow lines, well annulus, and flow tubing.
Frac water tanks are heated individually to the desired temperatures prior to the frac job then refilled and reheated for multiple stage frac jobs.

This process involves connecting our state-of-the-art MDF hydro-thermal heating units to each frac tank and then circulating the water through the unit and then back into the tank. The time it takes to heat each tank varies on the starting temperature of the fluids and the final temperature required by our customer. When additional tanks require heating, multiple units may be required to achieve the desired temperatures and completion times. In the case of additional frac job stages or delays, the process is repeated. Heat loss from lower ambient air temperatures, wind speed, and humidity, as well as other factors such as rain, snow, and ice all impact the target temperature of the tanks. Since any related cooling effects require additional heating, it is imperative to use a company with extensive heating experience in order to minimize unneeded or excessive costs.

 

Features

• Super heating equipment suitable for heating the fracturing fluid or other medium in arctic areas;

• The maximized heat exchange area improves the heat exchange rate greatly to above 94%;

• Dry burning protection and overtemperature protection ensure the safety during operation;

• Jereh intelligent control system permits one-key setting and automatic temperature regulation.

• Multi-function manifold allows heating of the supplied water, quick discharge and quick switch between the heated vessels.

• Heater designed with insulation and low viscosity oil pump for arctic applications.

Specifications

Carrier	Truck / Trailer / Skid
Chassis	BENZ / BEIBEN
Generator	64 hp (48 kW)
Centrifugal Pump	5×4×14
Heater	4.1 MW (14 M Btu/h)
Fuel	Diesel / LPG / CNG / LNG
Max. Working Pressure	43 psi (0.3 MPa)
Heating Capacity	528 gpm (2 m^3/min)
Heating Medium	Water / Frac Fluid

Successful Cases