25000L 25kl Aircraft Refueller with Automatic Chassis Tractor Sinotruck

• Customization: Available
• After-sales Service: Yes
• Warranty: Yes
• Model NO.: 25000L
• Category of Traffic: Freight
• Flying Range: Internal, International
• Scale of The Airline: Small-scale
• Type: Aircraft
• Part: Gas Turbine Starter
• Condition: New
• Aircraft Refuelling Truck: Aircraft Refuelling Truck
• 25000L Semi-Trailer Aircraft Refueller: 25000L Semi-Trailer Aircraft Refueller
• Aircraft Refueller: Aircraft Refueller
• Semi-Trailer Aircraft Refueller: Semi-Trailer Aircraft Refueller
• 38000L Semi-Trailer Aircraft Refueller: 38000L Semi-Trailer Aircraft Refueller
• 50000L 38000L Semi-Trailer Aircraft Refu: 50000L Semi-Trailer Aircraft Refu
• Transport Package: Roro
• Specification: 15000*2500*3500
• Trademark: SAINTWAH
• Origin: China
• Production Capacity: 200 Set/Sets Per Month

Product Description

Aircraft tank refueling truck

Product Introduction

This kind of equipment is self-propelled ground support equipment that provides Jet fuel for aircraft through on-board devices, oil pumping, pressure regulation, purification, metering and other links. This equipment consists of a car chassis, oil tank assembly, refueling control system, electrical control system, hydraulic system, and pneumatic control system.



25000L Semi-trailer aircraft refueller
Product Data Book

 

	CGJ5340GJJ
Chassis model	SINOTRUCK
engine	Nation III Automatic transmission FAST+CAT Engine and PTO
l´b´h,mm Overall dimension	13930×2500×3110
Trailer axle quantity	Single bridge
,m Minimum turning diameter	18.8
,Km/h Maximum speed	30
,Kg Curb weight	13400
,Kg Load mass	20000
,Kg Factory maximum total mass ,Kg Front axle load mass ,Kg Rear axle load mass ,kg Tanker axle load mass	33600 5700 14900 13000
,mm Scope of lifting platform	1750~4250
,L Rated volume of oil tank	25000

 

Import configuration parts list
 

No.	Equipment	Type	Brand
	Truck and Chassis	Eruo II or III engine with appropriate chassis	SINOTRUCK, Left Hand driving, Automatic transmission gear box;
	Fire extinguisher	Dry chemical powder BC type	QtyX2
	Tanks	ASTM Aluminum	Alloy 5083
	Bottom Loading	3" Bottom loading	KT, China
	Manhole		KT, China
	Filtration system	Filter water separator	Velcon / Faudi / Facet
	Flow Meter	Positive displacement with digital display	ISOIL VEG T
	Hose	1.5" overwing(hose reel)	Elaflex, Germany
	Hose	2" underwing (hose reel)	Elaflex, Germany
	Hose	2.5" underwing(lifting platform)	Elaflex, Germany
	Product pump	Centrifugal pump	Gorman Rupp
	Underwing coupling	2.5" API standard	TF,China
,	Hose reel		Aerosun Corporation
	Overfill Protection	Precheck valve should be available	Aerousn Corporation
	Sampling kit &PDG meter*	Sight glass &Piston type	Aerousn Corporation
	Bonding Reel & Clips	Manual rewind Reel, both sides	Aerousn Corporation
	Drain valve	Stainless steel auto close spring ball valve	QIYU China
	Deadman handle	Handswitch	Aerousn Corporation

*PDG meter: PD gauge Gammon type with graduated scale 0-30 psi(0-2.07bar), and valve for testing.  DP switcher should be available.
Delivery product and its free spare parts delivered together

SN	MODEL	NAME	QTY	REMARK
	CGJ5340GJJ	Refueller	1
Free spare parts
		Key Of Manhole Cover	2	Unlock The Manhole Cover
	φ100×5.3G	O Ring	5	Pipe Sealing
	φ80×5.3G	O Ring	5	Pipe Sealing
	2/3	Pneumatic logic valve	1
		Millipore sampling connection	1	Sampling
		Srew rod	1	Open footvalve
	6×1	Nylon Pipe	20m	For Pneumatic System
	C Type	Antistatic Belt	1	Antistatic
	8Kg	Fire Extinguisher	2
	1/8"	Quick Connection Joint	3	For Pneumatic System
		Accessories Bag	1	Reserve Accessories &Document

Special requirements:
METER should be a must to be Electronic Meter Digital ISOIL Vega T for all the refuellers
Automatic Transmission gear ATF for the Chassis Steering on Left handside and Air Condition is a must for all refuellers
Bottom Loading should be on both sides with all prechecks etc.
Ladder should be attached to the refueller without pipe and coupling.
Product recovery Tank should be auto shut off / auto alarm system and also enable in a close loop to return the product back to tank. Drain should be available as well. Small pump to move product to back to tank.
Pressure gauges and Millipore test points should be available for all refuellers
All our Equipment should Comply with JIG and IATA Standard.
-JIG 1 last issue (general);   
- EI 1529 (hose);
- EI 1542 (marking);
- EI 1545 (defuelling + bottom loading);
- EI 1581 (FWS);
Fire Extinguishers left and right
Tank Testing and Calibration Certificate
Lift Platform Testing Certificate
Meter Calibration Certificates
All Hoses Manufacturer Certificates
All Pipes testing hydrostatic Certificates
All Drawing Mechanical /Electrical Modules and Manual should be available in English language  and coded properly for any maintenance to go through for all the refuellers
Full Equipment including PTO Pump Warranty should be 2 years