| Customization: | Available |
|---|---|
| After-sales Service: | on Site Service |
| Warranty: | 1 Year |
Suppliers with verified business licenses
XM2005K road milling machine is for maintaining the asphalt concrete pavement and mainly applied to the excavation and refurbishment of large areas of highways, roads of cities and towns, airports, goods yards and parking lots etc. It can remove the upheaval, oil wave, overlapping curve, track and others of the pavement; It can also excavate the pit slot and grooves of the pavement; It can be applied to the napping of cement pavement and milling faulting of surface course. The working efficiency of this equipment is high, the construction process is simple, and it is easy to control the milling depth, and it is convenient and flexible to operate and has good maneuvering characteristics, the used materials of milling can be recycled directly and widely applied to the repair, refurbishment and maintenance of asphalt pavement.
Efficient and stable milling
447kw high-pressure common rail EFI engine (optional 470kw engine), in line with China III/Euro III emission standards, optimized power and torque curve, can adapt to milling different media, different depth milling needs;
Using engine three-speed milling technology, it can adapt to the engine is always in the best working condition and the highest efficiency when it is from brushing to thick milling;
Intelligent temperature control and heat dissipation system with independent monitoring of water temperature, oil temperature and intercooler to reduce starting resistance, fuel consumption, noise pollution and power loss;
The upper air inlet and rear air outlet duct design are adopted, and the internal temperature of the machine compartment is effectively reduced to prevent the aging of the internal components of the machine compartment;
The 18mm intercutter milling drum is arranged with the fourth generation of quick-change tool holders, which has lower cutting resistance and better cutting effect;
Equipped with the overall quick release system of the milling drum, it can support the replacement of 6×2mm fine milling drum and 15mm intercutter milling drum to meet the needs of different working conditions.
Fast and environmentally friendly feeding
Using 630 displacement motor, the conveying speed is 20% higher than before, and the waste carrying capacity is stronger; With the instant speed increase 2s function, the instantaneous carrying capacity of the belt is as high as 500m³;
A new generation of customized imported pattern belt, with reduced pitch, smoother discharging and higher reliability;
The left and right swing angle of the conveying belt is the highest in the industry, up to 65°, which effectively handles special working conditions such as roundabout construction and green belt construction;
Patented sprinkler dust reduction technology: spraying dust reduction at the discharge port to reduce dust pollution to the environment;
Optional vacuum dust removal system for lower dust around the milling chamber and conveyor belt.
Flexible walking
The walking system adopts stepless speed regulation to achieve 0-6km/h walking, and the maximum walking speed can reach 6km/h when moving in a small range;
It has four steering modes (front wheel steering, rear wheel steering, turning, wedge) for good maneuverability.
Intelligent and comfortable control
In addition to the conventional forward and backward enable buttons, the electronic control handle adds a cruise control memory button (long press the button for more than 3S in the driving mode of the milling operation, and store the current walking speed. Click this button in the same milling operation driving mode to retrieve the current stored travel speed) to facilitate memory construction; At the same time, the electronic control handle is associated with sprinkling, feeding belt start and stop function;
The one-key construction button has the functions of one-key hanging milling drum, increasing milling drum speed, opening sprinkler, and opening conveying belt, which is more convenient to operate;
The one-key obstacle crossing button has the ability to press the one-key obstacle crossing button - crossing the obstacle - pressing the one-key obstacle crossing button to recover, which greatly simplifies the difficulty of the operator's operation;
The four-leg same rise and drop button has a key four legs with the same rise and fall, which makes the milling accuracy higher and more convenient to operate during pit milling operations;
The intelligent sprinkler switch has the ability to automatically adjust the amount of sprinkler water, automatically matches the sprinkler water according to the current working conditions, prolongs the frequency of water refill, and has a higher degree of operation intelligence.
|
Item
|
Unit
|
XM2005K
|
|
|
Maximum milling width
|
mm
|
2000
|
|
|
Maximum milling depth
|
mm
|
330
|
|
|
Milling wheel
|
Tool spacing
|
mm
|
18
|
|
Number of tools
|
|
146
|
|
|
Milling wheel diameter (with tool)
|
mm
|
1020
|
|
|
Milling wheel maximum inclination
|
°
|
5
|
|
|
Diesel engines
|
Cooling method
|
|
Water cooling
|
|
Model
|
|
QSZ13
|
|
|
Number of cylinders
|
|
6
|
|
|
Rated power
|
kw
|
410
|
|
|
Engine speed
|
rpm
|
1900
|
|
|
Fuel consumption: full load
|
l/h
|
96
|
|
|
Speed/grade ability
|
Working speed
|
m/min
|
0-90
|
|
Walking speed
|
km/h
|
0-5.4
|
|
|
Theoretical Gradeability (Working Blocks)
|
%
|
60
|
|
|
Ground clearance
|
|
330
|
|
|
Weight / load
|
Shipping weight
|
kg
|
28500
|
|
Working weight
|
kg
|
30500
|
|
|
Track device
|
Front track
|
mm
|
1720×300×620
|
|
Rear crawler
|
mm
|
1720×300×620
|
|
|
Box volume
|
Fuel tank
|
L
|
1200
|
|
Hydraulic tank
|
L
|
150
|
|
|
Water tank
|
L
|
3300
|
|
|
Electrical system
|
V
|
24
|
|
|
Conveyor belt device
|
Aggregate conveyor belt width
|
mm
|
850
|
|
Discharging conveyor width
|
mm
|
850
|
|
|
Conveyor belt conveying capacity
|
≤m3/h
|
375
|
|
|
Shipping dimensions
|
Machinery (length×width×height)
|
mm
|
12597×2500×3000
|
|
Belt conveyor (length × width × height)
|
mm
|
8060×1150×1500
|
|
){kind=link}