Sucker Rod Grade K

• Customization: Available
• After-sales Service: Provided
• Warranty: 1 Year or 2000hours
• Model NO.: Sucker Rod Grade K
• Surface Treatment: Sand Blast
• Operation Pressure: Vacuum
• Material: Cast Steel
• Transport Package: Skid
• Specification: 8, 350 x 2, 400 x 3, 000 mm
• Trademark: SAINTWAH
• Origin: Saintwah Inc.
• HS Code: 8207801000
• Production Capacity: 10000

Product Description

Sucker Rod Grade K

HL, HY grade rod is made of high quality alloy steel manufacturing, have the characteristics of ultra high strength, used in deep well, big strong pump used in production.

Product Description

Introduction

A steel sucker rod is one of the important equipment of oil field.Can provide seven kinds of the level of sucker rod, including C, K, D, KD, HL, HY and KH.C, K, D sucker rod press design and manufacture standard of API Spec 11 B, KD, HL, HY grade rod design and manufacture according to standard API SPEC 11B, KH level rod according to standard within the company.
C grade sucker rod series - is mainly used for light, medium load, no corrosion or corrosion shallow Wells or in deep well pumping, material is carbon steel or manganese steel.
Grade D sucker rod is made of high quality alloy steel, after heat treatment with high strength, plasticity is good, long life and other characteristics, it is suitable for light when there is no corrosion or corrosive medium in the deep Wells under the environment of use.
HL, HY grade rod is made of high quality alloy steel manufacturing, have the characteristics of ultra high strength, used in deep well, big strong pump used in production.
And K, KD and KH level of sucker rod with different content of Ni Cr - Ni - Mo high quality alloy steel manufacturing, have anticorrosive, resistance to corrosion function, respectively applicable to strong corrosion of shallow, middle and deep Wells.

 

 

 

Grade K sucker rod choose materials

Mechanical Properties Of Grade K,KD Sucker Rod
Grade	Minimum Yield Strength(0.2% Residual Deformation)		Minimum Tensile Strength		Maximum Tensile Strength		Elongation200mm%	Reduction Of Area Z%	Surface HardnessHRC	Core HardnessHB	Fatigue Life
	psi	MPa	psi	MPa	psi	MPa	≥13	≥50	/	/	≥1.0X106
K	60000	414	90000	621	115000	793	≥13	≥50	/	/	≥1.0X106
KD	85000	590	115000	795	140000	965	≥13	≥50	/	/	≥1.0X106

Choose materials

Chemical composition of common sucker rod
AISI	C	Si	Mn	P	S	Cr	Ni	Mo	V	Cu	Al
3130	0.22-0.29	0.15-0.35	0.71-1.0	≤0.025	≤0.025	0.42-0.65	0.72-1.0	0.01-0.06	/	≤0.2	/
4320	0.18-0.42	0.15-0.35	0.8-1.0	≤0.025	≤0.025	0.7-0.9	1.15-1.5	0.2-0.3	0.04-0.09	≤0.35	≤0.035
4330	0.3-0.35	0.15-0.35	0.8-1.1	≤0.025	≤0.025	0.8-1.1	1.65-2.0	0.2-0.3	0.05-0.10	≤0.2	/
4621	0.18-0.23	0.17-0.37	0.7-0.9	≤0.025	≤0.025	≤0.35	1.65-2.0	0.2-0.3	/	≤0.2	/
4720	0.19-0.23	0.15-0.35	0.85-1.05	≤0.025	≤0.025	0.8-1.05	0.9-1.2	0.22-0.30	0.02-0.05	0.40-0.60	/

 

Production

For common sucker rod

Raw Material Test → Cold Straighten → Cut → Forge → Hot Treatment → Hot Alignment → Shot Blasting → Rod Head Machining → Assembly → Protective Cap → Package → Aczoiling Treatment.

For extra high tensile sucker rod

Raw Material Test → Cold Straighten → Cut → Forge → Quenched And Tempered → Hot Treatment → Hot Alignment → Shot Blasting → Rod Head Machining → Surface Quenched → Assembly → Protective Cap → Package → Aczoiling Treatment.