Drilling Cuttings Management System Waste Management.

• Customization: Available
• After-sales Service: Provided
• Warranty: 1 Year or 2000hours
• Model NO.: Drilling Cuttings Management System Waste Manageme
• Surface Treatment: Oxidation
• Operation Pressure: Atmospheric Pressure
• Material: Cast Steel
• Shale Shaker: Shale Shaker
• Mini Shakers: Mini Shakers
• Single Deck Shale Shaker: Single Deck Shale Shaker
• Double Deck Shaker: Double Deck Shaker
• Solids Control.: Solids Control.
• Vist Vacuum Shale Shaker: Vist Vacuum Shale Shaker
• Mud Cleaner: Mud Cleaner
• Decanter Centrifuge: Decanter Centrifuge
• Desilter: Desilter
• Mud Agitator: Mud Agitator
• Mud Mixing Hopper Unit: Mud Mixing Hopper Unit
• Oil Drilling Mud System: Oil Drilling Mud System
• Tbm and Bored Pile Desanding Plant: Tbm and Bored Pile Desanding Plant
• Solids Removal Unit for Mining Industry: Solids Removal Unit for Mining Industry
• Liquid Mud Plant: Liquid Mud Plant
• Transport Package: Skid
• Specification: 8, 350 x 2, 400 x 3, 000 mm
• Trademark: SAINTWAH
• Origin: Saintwah Inc.
• HS Code: 8207801000
• Production Capacity: 10000

Product Description

Drilling Cuttings Management System

Drilling Cuttings Management System

Oil sludge is a mixture consisting of oil, water and solids. The treatment on oil sludge would recover much oil and water for reuse. Also it is an ideal solution to for the solids disposal. More oil and water recovered, more energy and resource could be saved. GN oil sludge treatment products mainly include decanter centrifuge, oil water separators and thermal desorption unit.

 

DESCRIPTION

GN drilling cuttings management system is used for taking drilling fluids from the drilling cuttings and clean the fluids for resuse. It is to maximize the recycling of drilling fluids, and minimize the drilling waste in order to save cost for operators.

• For oil based drilling cuttings, normally it can reduce the oil on the cuttings to 3% to 5%.
• For water based drilling cuttings, normally it can reduce the moisture content for easy transportation.
• Recycling drilling fluids for reuse to save cost .
• Reduce the drilling waste quantity to save money on the disposal or further treatment.

 

GNCM-40A Standard Drilling Cuttings Management System

 

Drilling Cuttings Management System Parameter

S/N	Name	Description
1	Vertical Cuttings Dryer	GNCD930 with option for VFD or fixed speed.
2	Decanter Centrifuge	GNLW363 centrifuge 14inch bowl, Optional model as below: GNLW363CG Premium Centrifuge with fixed speed. GNLW363CG-VFD Premium Centrifuge with VFD drive. GNLW363CD Economic Standard with fixed speed. GNLW363CD-VFD Economic Standard with VFD drive.
3	Screw Pump	Two sets GNG30A-075 Screw Pump with capacity: 30m³/h for each pump. One for taking fluidsfrom catching tank to feed the decanter centrifuge, the other for flushing the Vertical Dryer.
4	Skid with catching tank	Fast move Skid for mounting all the equipment One Catching tank with capacity:4m³for catching fluids from vertical cuttings dryer.
5	Telescopic Skid	Two telescopic skid with walkways and handrails for safe operation. One for mounting the decanter centrifuge to a higher position in order to allow the centrifuge discharged fluids feed to active mud system by gravity. The other telescopic skid for mounting and adjusting the height of the vertical cuttings dryer to allow the discharge of drying cuttings
6	Electric Cradle	0.5 Tons electric cradle for lifting the components of vertical dryer.
7	Electric Control System	Two lighting system, electrical control boxes and cables and plugs for operation the complete system.

Performance of GN Drilling Cuttings Management System

The big advantage is that, GN Vertical Cuttings Dryer is the first unit in China to use in Both oil based drilling cuttings and water based drilling waste. So it meets clients requirement to use one set of system to treat both mud for the same well without changing the way to handle the different drilling waste.

Oil Based Drilling Cuttings Treatment

Water Based Drilling Cuttings Treatment