Automatic Tank Cleaning System

• Customization: Available
• After-sales Service: Provided
• Warranty: 1 Year or 2000hours
• Manufacturing Process: Casting
• Surface Treatment: Sand Blast
• Operation Pressure: Vacuum
• Material: Cast Steel
• Transport Package: Skid
• Specification: 8, 350 x 2, 400 x 3, 000 mm
• Trademark: SAINTWAH
• Origin: Saintwah Inc.
• HS Code: 8207801000
• Production Capacity: 10000

Product Description

Tank Cleaning System

General Description

SWTC-30C Automatic Tank Cleaning System is a closed 
loop system to continue clean the mud tanks, oil tanks, 
chemical tanks or slurry tanks.
The SWTC-30C Tank Cleaning system supply fresh water 
to the high pressure tank cleaning machine mounted inside 
the tank. And the integrated pumps will bring the dirty 
wash water back to the system for cleaning and return 
clean water back to the tank cleaning machine to reuse. 
This process will minimize the consumption of water and 
manpower involved.
The SWTC-30C Automatic tank cleaning system 
closed loop is a continuous process with waste water 
cleaning capacity up to 30 m³/h

Main Specs
• Clean Water Capacity: 7.5 m³
• Slop Processing Capacity: 30 m³/h
• Dimension: 8164x2416x3065(mm)
• Weight: 7000 KG
• Total Power: 38 Kw
• No. of Pumps: 1x Vacuum Pump, 1x Electrical 
Diaphragm pump 1x High Pressure Pump
• Include motor and control panel with Explosion Proof for 
CNEX Zone 1 application 
Tank Cleaning System

Equipment List
 Working Process
1) High Pressure Centrifugal pump (8) pump clean 
water from Buffer tank (7) and supply to tank 
cleaning machine(2) to clean the mud tank.
2) Suction Pump(2) suck dirty wash water from 
mud tank through the strainer (1) which will 
filter the coarse solids.
3) The suction pump (2) will feed dirty water 
through the static mixer to inclined plate clarifier
 (5).
4) The chemical dosing system (3) will supply 
chemical/ flocculants to the static mixer(4) to 
mix with the dirty water to enhance the 
separation in the IPC.
5) The inclined plate clarifier (5) will separate 
 the settable solids.
6) The clean water from IPC (5) will overflow to 
buffer tank (7)
7) The buffer tank level control system will control 
the pumps automatically.
8) Membrane Pump (6) will take the settable 
slurry from the IPC (5) to Skip 
Tank Cleaning System

Inclined Plate Clarifier
IPC (Waste Treatment)
SW Inclined Plate Clarifiers (IPC)is a high performance, 
Lamella plate design for removal of settleable solids in a 
variety of waste streams. The lamella plate is made from 
stainless steel.
SW IPC design incorporates inclined plate settling 
surfaces pitched at a 55° angle from the horizontal with 
uniform plate spacing. Due to plate angle the solids slide 
down the plates into the sludge hopper below the plate 
pack. The simple, inexpensive design, combined with 
sludge conveyor Auger makes the SW IPC easy toinstall, 
operate and maintain.
Chemical like polymer pretreatment often improves solids 
removal efficiencies. The use of chemical flocculants with 
SWIPC is based on system efficiency, application 
contaminant characteristics and cost. 
Inclined Plate Clarifier