High Strength Sucker Rod

• Customization: Available
• After-sales Service: Provided
• Warranty: 1 Year or 2000hours
• Model NO.: High Strength Sucker Rod
• Surface Treatment: Sand Blast
• Operation Pressure: Vacuum
• Material: Cast Steel
• Transport Package: Skid
• Specification: 8, 350 x 2, 400 x 3, 000 mm
• Trademark: SAINTWAH
• Origin: Saintwah Inc.
• HS Code: 8207801000
• Production Capacity: 10000

Product Description

High Strength Sucker Rod

It is a kind of manufacturability anti-corrosion sucker rod, the rod surface spraying a layer of special anti-corrosion materials, used in the medium corrosive well conditions.

 

Product Description

Introduction

It is a kind of manufacturability anti-corrosion sucker rod, the rod surface spraying a layer of special anti-corrosion materials, used in the medium corrosive well conditions, can prevent the corrosion of rod body and prevent the corrosive material from contacting with the rod body to prolong the life of the rod body.

 

 

Product application

Spray Anti-corrosion Sucker Rod

It is a kind of manufacturability anti-corrosion sucker rod, the rod surface spraying a layer of special anti-corrosion materials, used in the medium corrosive well conditions, can prevent the corrosion of rod body and prevent the corrosive material from contacting with the rod body to prolong the life of the rod body.

 

Chemical composition

Spray Anti-corrosion Sucker Rod Specification

Sucker Rod Nominal Value	Φ16(5/8")	Φ19(3/4")	Φ22(7/8")	Φ25(1")	Φ29(11/8")
Rod Body Diameter	15.88+0.18-0.36 (0.625+0.007-0.014)	19.05+0.20-0.41 (0.750+0.008-0.016)	22.23+0.20-0.41 (0.875+0.008-0.016)	25.40+0.23-0.46 (1.000+0.009-0.018)	28.58+0.25-0.51 (1.125+0.010-0.020)
Outer Diameter Of External Thread Shoulder	31.8+0.13-0.25 (1.250+0.005-0.010)	38.1+0.13-0.25 (1.500+0.005-0.010)	41.3+0.13-0.25 (1.625+0.005-0.010)	50.8+0.13-0.25 (2.000+0.005-0.010)	57.2+0.13-0.25 (2.250+0.005-0.010)
Wrench Width ±0.8(±0.031)	22.2(0.875)	25.4(1.000)	25.4(1.000)	33.3(1.313)	38.1(1.500)
WrenchLength	31.8(1.250)	31.8(1.250)	31.8(1.250)	38.1(1.500)	41.3(1.625)
APIRod Length ±50(±2.0)	508(20) 1118(44) 1727(68) 2337(92) 2946(116) 7518(296) 9042(356)	508(20) 1118(44) 1727(68) 2337(92) 2946(116) 7518(296) 9042(356)	508(20) 1118(44) 1727(68) 2337(92) 2946(116) 7518(296) 9042(356)	508(20) 1118(44) 1727(68) 2337(92) 2946(116) 7518(296) 9042(356)	508(20) 1118(44) 1727(68) 2337(92) 2946(116) 7518(296) 9042(356)
Domestic Rod Length±50	900,1400,1900, 2400,2900,3400, 7900,9900	900,1400,1900, 2400,2900,3400, 7900,9900	900,1400,1900, 2400,2900,3400, 7900,9900	900,1400,1900, 2400,2900,3400, 7900,9900	900,1400,1900, 2400,2900,3400, 7900,9900
Upset Flange Diameter	31.1+0.13-3.17 (1.219+0.005-0.125)	35.7+0.13-3.17 (1.406+0.005-0.125)	38.1+0.13-3.17 (1.500+0.005-0.125)	48.4+0.13-3.17 (1.906+0.005-0.125)	55.6+0.13-3.17 (2.188+0.005-0.125)
AR±3.2(±0.125)	47.6(1.875)	57.1(2.250)	66.7(2.625)	76.2(3.000)	85.7(3.375)
CR+1.59-0.40 (+0.063-0.016)	3.2(0.125)	3.2(0.125)	4.8(0.188)	4.8(0.188)	4.8(0.188)

Spray Anti-corrosion Sucker Rod Mechanical Properties

Mechanical Properties Of Spray Anti-corrosion Sucker Rod
Grade	Minimum Yield Strength (0.2% Residual Deformation)		Minimum Tensile Strength		Maximum Tensile Strength		Elongation 200mm%	Reduction Of AreaZ%	Surface Hardness HRC	Core Hardness HB	Fatigue Life
	psi	MPa	psi	MPa	psi	MPa	≥13	≥50	/	/	≥1.0X106
C	60000	414	90000	621	115000	793	≥13	≥50	/	/	/
D	85000	586	115000	793	140000	965	≥13	≥50	/	/	/
HL	115000	795	140000	965	173339	1195	≥13	≥45	/	/	/
HY	/	/	140000	965	173339	1195	/	/	≥42	≥224	/

 

Chemical Composition Of Spray Anti-corrosion Sucker Rod
AISI	C	Si	Mn	P	S	Cr	Ni	Mo	V	Cu	Al
4130	0.26-0.33	0.17-0.37	0.4-0.7	≤0.025	≤0.025	0.8-1.1	≤0.3	0.15-0.25	/	≤0.2	/
4138	0.37-0.45	0.17-0.37	0.9-1.2	≤0.025	≤0.025	0.9-1.2	≤0.3	0.2-0.3	/	≤0.2	/
4140	0.38-0.45	0.17-0.37	0.5-0.8	≤0.025	≤0.025	0.9-1.2	≤0.3	0.15-0.25	0.04-0.09	≤0.2	/
4142	0.38-0.45	0.17-0.37	0.5-0.8	≤0.025	≤0.025	0.9-1.2	≤0.3	0.15-0.25	0.04-0.09	≤0.2	/
4720	0.19-0.23	0.15-0.35	0.85-1.05	≤0.025	≤0.025	0.8-1.05	0.9-1.2	0.22-0.30	0.02-0.05	0.40-0.60	/

 

Sucker Rod Weight List
Size	5/8"	3/4"	7/8"	1"	1-1/8"	1-1/4"	1-1/2"
kg/m	1.68	2.4	3.2	4.2	5.3	6.4	9.5

 

Applications

The sucker rod is widely used in the oil extraction industries. The different grade sucker rod can be applied in different applications.

Grade C sucker rod

Moderate strength, has a certain degree of resistance to the sulfide stress cracking, it is suitable for sour environments.

Grade D sucker rod

The grade D sucker rod is manufactured from high quality heat treated steel alloy, which has high tensile and yield strength, it is can be used in the non-corroding or mildly corroding environments.

Grade K sucker rod

The grade K sucker rod has a good corrosion resistance in H2S, CO2, and NaCl media, it is widely used in corrosion environments.

Grade H sucker rod

This is a type of sucker rod with extra high tensile strength it is ideal for deep and large wells.