| After-sales Service: | Provided |
|---|---|
| Warranty: | 1 Year or 2000hours |
| Manufacturing Process: | Casting |
| Surface Treatment: | Sand Blast |
| Operation Pressure: | Vacuum |
| Material: | Cast Steel |
| Customization: |
|---|
Suppliers with verified business licenses
Product introduction
The land drilling rig is used for oil and gas exploration and development on wells that are 4500- 7000m (drill pipe 4 1/2") or 4000-6000m (drill pipe 5") deep. Maximum drilling depth 7,000 m.
1. The basic structure, design, and manufacture specifications are according to international standards, including API, IEC,and HSE.
2. The rig driving model could be VFD, mechanical orcombined drive, client could require the rig model.
3. The rig substructure model could be box-on-box, swing-upor hydraulic cylinder raising, with compact structure.
4.Drilling rigs can choose DC drive, AC drive, mechanical drive drive and hybrid drive solutions, which can be configured according to customer needs.
5. All systems and equipment in this drilling rig adopt high-temperature resistant components and air cooling systems for greater effectiveness.
technical parameter
| QUOTATION LIST | ||||||
| Q | ||||||
| S/N | Product Name | Description | Qty | Unit | Type | Vendor |
| 1 | Lifting system | 1 | set | |||
| 1.1 | Crown block | Maximum hook load 4500KN Number of pulleys 7 Main pulley outer diameter (1)1524mm (60") 7pcs Wire rope diameter (1)38 mm (1-1/2") This crane complies with API-4F | 1 | set | TC450 | ZPEC |
| 1.2 | Travel block | Maximum hook load 4500KN Number of pulleys 6 Pulley outer diameter (1)1524mm (60") Wire rope diameter (1)38mm(1-1/2") This tour car complies with API-8C | 1 | set | YC450 | ZPEC |
| 1.3 | Hook | Maximum static hook load 4500KN This large hook complies with API-8C | 1 | set | DG450 | ZPEC |
| 1.4 | Swivel | Maximum static hook load 4500KN This faucet complies with API-8C | 1 | set | SL450 | LSPE |
| 1.5 | Mast | • Maximum static hook load (no wind, no standing root 6x7 rope tie) 4500kN • Derrick working height 45m • Derrick top span Front/side 2.2m/2.2m • Derrick bottom span 9m • Second platform working height 26.5m; 25.5m; 24.5m •Two-layer platform standing capacity 5"-28m standing root 7000m • Wind load capacity Non-working state (no hook load, no standing root) 38.6m/s Non-working state (no hook load, full root) 30.7m/s Lifting derrick (no hook load, no standing root) 16.5m/s This derrick conforms to API-4F | 1 | set | JJ450/45-K | ZPEC |
| 1.5.1 | Casing stabbing board | 1 | set | Mech | ZPEC | |
| 1.5.2 | Aviation warning light | 1 | set | incl | ||
| 1.5.3 | lightning rod | 1 | set | incl | ||
| 1.5.4 | 2 | set | ZPEC | |||
| 1.6 | Raising wirerope | Consists of 2 lifting ropes. It is used for lifting and lowering derricks and bases | 1 | set | 72-6x84WSNS +IWR1770, L=55400 | BOMCO |
| 1.7 | Deadline anchor | 1 | set | JZG41 | ZHONGHENG | |
| 1.8 | It 1t Air winch | QJ-1 | 2 | set | JULING | |
| 1.9 | Substructure | • Drilling rig height: 9m • Turntable beam load: 4500kN • Root load acting simultaneously with turntable load: 2200kN •Lower span of supporting derrick: 9m • Vertical root box capacity: 5''28 root 7000m • This base conforms to API-4F | 1 | set | DZ450/9-S | ZPEC |
| 1.9.1 | Hydraulic buffering device | It is composed of hydraulic cylinder, hydraulic pipeline and quick connector. It is used for cushioning when lifting and lowering derricks and bases. | 1 | set | ZPEC | |
| 1.9.2 | Leveling jack | For derrick leveling, capacity: 50t | 2 | pcs | LF100/200LB | ZPEC |
| 1.9.3 | Stabilizer device | 1 | set | ZPEC | ||
| 1.9.4 | Hydraulic blowout preventer mobile device |
Rated lifting force 400x2=800kN Maximum lifting height 4.8m Maximum lifting speed 1.5m/min Rated working pressure 16MPa Rated working flow 120 L/min | 1 | set | FY-80Y/4.8 | BAOYE |
| 1.9.5 | Mud umbrella | 13-5/8" flared mouth with umbrella | 1 | set | ZPEC | |
| 1.9.6 | Dog house | 1 | set | ZPEC | ||
| 1.9.7 | Drill floor mat | 1 | set | |||
| 1.9.8 | Cat walk | \ | 1 | set | ZPEC | |
| 1.9.9 | DP rack | Height: 1070mm, length: 9m | 8 | set | ZPEC | |
| 1.10 | Drawworks | Three-shaft winch, fully sealed winch frame, driven by two YZ08 DC motors, the main brake is hydraulic disc brake, the auxiliary brake is electromagnetic eddy current brake, with overhead crane roll valve device, Lebus slotted drum. The winch complies with the API spec7K specification and is marked with API. Maximum input power 1470kW Maximum fast rope pull force 485kN Wire rope (1)38mm winch gear number 4 gears, stepless speed regulation | 1 | set | JC70D | ZPEC |
| 1.10.1 | Hydraulic disc brake | Number of normally open working calipers6, Number of normally closed working calipers2, Brake disc diameter and thickness 1650x76mm; The rated pressure of the disc brake system is 9MPa, the maximum positive pressure of one side of the working gear is 75kN, the maximum positive pressure of the safety gear is 90kN, the cooling method is water-cooled, and the disc brake lever is required to be electronic, and the disc brake handle can be self-locked at any position. | 1 | set | DBS75 | BOKE |
| 1.10.2 | Disc brake hydraulic station | The disc brake hydraulic station adopts the form of air cooling, adapting to the ambient temperature of 60-70 degrees, radiator and fan assembly, using overhead type, external heat dissipation. The heatsink is designed with sufficient capacity | 1 | set | BOKE | |
| 1.10.3 | Electromagnetic eddy current brake | • Maximum braking torque: 98000N.m • Cooling mode: water cooling | 1 | set | SDWS70 | SHENTONG |
| 1.10.4 | Cooling device | It is composed of vertical radiator, water pump, pipeline, control valve, etc. • Tank volume: 30m3 | 1 | set | SHENTONG | |
| 1.10.5 | DC motor | DC motor •Rated power: 800kW •Rated voltage: 750V •Rated speed: 970r/min •Rated torque: 8034N.m •Insulation grade: Class H • Water mist protection device is installed at the entrance of the air duct | 2 | set | YZ08A | CRRC |
| 1.10.6 | Auto-bit | It consists of 1 set of 45kW AC motor, 1 set of gearbox and 1 set of LT600/250T clutch, etc. •Motor Model: M2JA225M4A-WJ41 •Motor Power: 45kW •Motor Voltage: 380V •Motor rated speed: 1480 r/min Speed encoder is installed. The encoder pulse signal output is connected to an explosion-proof cable box with built-in photoelectric isolation. Three sets of velocity pulse signals are isolated to combat harmonic interference. | 1 | set | ZPEC | |
| 1.10.7 | Oil and air pipelines | 1 | set | ZPEC | ||
| 1.11 | Combined hydraulic station | Air cooled | 1 | set | BAOYE | |
| 1.12 | Drilling wirerope | API Spec 9B compliant • Xilu steel core 2000m; | 1 | rolls | 38-6x19S- IWRC EIPS | BOMCO |
| 1.13 | Electric spooler | • Maximum load: 14t • Maximum speed: 5rpm • Motor power: 7.5kW • Equipped with lead rope drum | 1 | set | ZPEC | |
| 2 | Rotary system | 1 | set | |||
| 2.1 | Rotary table | Through hole diameter 952.5mm Maximum static load 5850kN Maximum speed 300r/min Gear ratio 3.56 Maximum working torque 32362Nm The turntable complies with API-7K | 1 | set | ZP375 | ZPEC |
| 2.1.1 | Rotary table bushing | • 1 x 2 3/8" to 8 5/8" • 1 x 11-3/4" to 13-3/8" • 1 x 9-5/8" to 10-3/4" • 1 x 20" cannula top | 1 | set | ZPEC | |
| 2.1.2 | Rotary table independent drive | The turntable independent drive consists of a two-speed gearbox, an inertia brake and cardan shaft, driven by an 800 kW motor with adjustable turntable speeds between 0 and 300 rpm. | 1 | set | ZPEC | |
| 2.1.3 | DC motor | DC Motor • Rated Power: 800kW • Rated Voltage: 750V • Rated Speed: 970r/min • Rated Torque: 8034N.m • Insulation Grade: Class H • Water mist protection device is installed at the air duct entrance | 1 | set | YZ08B | CRRC |
| 3 | High-pressure circulation system | 1 | set | |||
| 3.1 | Mud pump | 3 | set | F-1600HL | ZPEC | |
| 3.1.1 | Mud pump device | Pulley, perfusion pump, large base and other slurry pump accessories | 3 | set | ZPEC | |
| 3.1.2 | DC motor | DC motor •Rated power: 800kW •Rated voltage: 750V •Rated speed: 970r/min •Rated torque: 8034N.m •Insulation grade: Class H • Water mist protection device is installed at the entrance of the air duct | 6 | set | YZ08A | CRRC |
| 3.2 | High pressure manifold | Double riser, double ground manifold; It is composed of drill platform valve group, ground valve group, high-pressure hard manifold and high-pressure short hose. All gate valves are manual gate valves. • Manifold Inner Diameter: 4" • Working Pressure: 10000psi • Test Pressure: 15000psi • Operating temperature: -29°C-121°C • Working medium: water, drilling fluid, crude oil, cracking oil • Connection method: connected by non • Meet the translation of 5 wells with a spacing of 5 meters. | 1 | set | : 4"ID, FIG 1003 | ZPEC |
| 3.3 | Hose | 23m, 10000psi | 2 | pcs | JINGBO | |
| 4 | Low pressure circulation system | 1 | set | |||
| 4.1 | mud system | The mud circulation system adopts vibrating screen, vacuum deaerator, mud cleaner, centrifuge and other equipment for five-stage purification treatment, which can meet the process requirements of drilling fluid circulation, perfusion, aggravation and accident treatment under special circumstances, and the whole system is resistant to high temperature, explosion-proof, anti-leakage and anti-corrosion. •Total system volume: 290m3 •Rated pressure of slurry low-pressure circulation pipeline: 1MPa •Rated pressure of clean water pipeline: 0.5MPa •Weighted mixing system processing capacity: 240 m3/h •Solid control equipment capacity: 2240 m3/h • Mud suction line diameter: 12" • Tank size: 12000mmx3000mmx2450mm • Overflow pipe to meet the translation of 5 wells with a spacing of 5 meters. | 1 | set | ||
| 4.1.1 | Treatment tank | • Tank size: 12000mmx3000mmx2450mm | 4 | pcs | ZPEC | |
| 4.1.2 | Reserve tank | • Tank size: 12000mmx3000mmx2450mm | 1 | pcs | ||
| 4.1.3 | Drilling water tank | • Tank size: 12000mmx3000mmx2600mm | 1 | pcs | ||
| 4.1.4 | Aggravation skid | 1 | pcs | |||
| 4.1.5 | Duty house | Room size: 2400mmx1600mmx2400mm | 1 | set | ||
| 4.1.6 | Poor boy | • Pressure: 4.0 Mpa • Separator diameter: 1200mmx6000mm • Gas throughput: 25000m3/h • Hydrogen sulfide resistant | 1 | set | ||
| 4.1.7 | Shale Shaker | The G-force < of the high-frequency vibrating screen is 7.8g, the amplitude A< 6.5mm, and the maximum processing capacity of a single unit is 60 L/s. | 3 | set | GX/S-III | CDBOM |
| 4.1.8 | Vacuum deairser | • Capacity 200-240m3/h • Power 22kW+3kW | 1 | set | HCQ240-B | HAILUYA |
| 4.1.9 | Mud cleaner | • Flow rate 220m3/h, cyclone 300x2/100x16, power 2x2.2kW. Sanding swirl barrel 12" x 2, sand removal cyclone barrel 4" x 16 | 1 | set | HZQ300x2/100x 16 | HAILUYA |
| 4.1.10 | Medium-speed centrifuge | • Capacity: 50m3/h • Speed: 1950rpm • Including one vertical liquid supply pump, power: 5.5KW | 1 | set | LW450-842NA | FEIDA |
| 4.1.11 | High-speed centrifuge | • Capacity: 40m3/h • Speed: 3200rpm • Including one vertical liquid supply pump, power: 5.5KW | 1 | set | GLW500- 1300NA | FEIDA |
| 4.1.12 | Shear pump | • Flow rate 120m*h • Head 35m • Power 55kW • Speed 2900rpm | 1 | set | WJQ5x6-55KW | WP |
| 4.1.13 | Mixing pump | • Flow rate 200-270m3/h • Head 25-45m • Power 75kW • Speed 1450rpm | 2 | set | SB6x8 | WP |
| 4.1.14 | Sand pump | • Flow rate 200-270m3/h • Head 25-45m • Power 75kW • Speed 1450rpm | 2 | set | SB6x8 | WP |
| 4.1.15 | Metering pumps | • Flow rate 40m?/h • Head 14m • Power 15kW • Speed 1450rpm | 2 | set | SB3x4 | WP |
| 4.1.16 | Water Pump | • Flow rate 40m?/h • Head 14m • Power 15kW • Speed 1450rpm | 2 | set | SB3x4 | WP |
| 4.1.17 | Mixing hopper | • Throughput 200m3/h | 3 | set | ZHP150 | WP |
| 4.1.18 | () Agitator (single impeller) | • Power: 15kW | 14 | set | HJB-15 | ZPEC |
| 4.1.19 | Agitator | • Power: 2.2kW | 1 | set | ZPEC | |
| 4.1.20 | Rotary mud gun | Pressure: 1Mpa 3 heads | 12 | pcs | NJQ-80 | ZPEC |
| 4.1.21 | Pill tank | Electric type | 1 | pcs | 2M3 | ZPEC |
| 4.1.22 | Mud return line | Inner Diameter: 12", designed to connect with the flare, including flushing line | 1 | set | ZPEC | |
| 4.1.23 | Slurry distributor | It is divided into three and fed the feed liquid of the three vibrating screens | 1 | set | ZPEC | |
| 4.1.24 | Reserve tank | • Tank size: 10600mmx3000mmx2450mm | 4 | pcs | ZPEC | |
| 5 | Power system | 1 | set | |||
| 5.1 | Auxiliary generator | Volvo 400KW, 400V, 50Hz. | 1 | set | ||
| 5.2 | Generator room | 10mx3mx3.2m | 1 | set | ZPEC | |
| 5.3 | SCR/MCC SCR/MCC Electronic Control System | Electricity: 50HZ, power supply voltage is 600V 3P and 400V/3P+N; Electric control room (1 building, within 12*3*3.1 meters); 2 overhead air conditioners; Set up 4 main generators, 1 auxiliary air compressor and a 600V wiring skylight for network electricity; Supporting 6 SCR transmission cabinets (2 winches, 1 turntable, 1/2/3 mud pumps); 1 set of automatic drilling frequency conversion control cabinet; 1 set of eddy current brake electric control cabinet (provided by brake manufacturer); 6 MCC cabinets (75KW and below pumps are directly started); 1 set of 1250KVA main transformer (600/400V, 50HZ); The terminal outlet board connector adopts China's domestic non-sparking explosion-proof products; The main power distribution devices (air circuit breakers, molded case circuit breakers, miniature circuit breakers, contactors, thermal relays) adopt international brands; The interior and exterior cables adopt Chinese domestic brands. The cable meets the translation of 5 wells with a spacing of 5 meters. | 1 | set | ZPEC | |
| 6 | Air supply system | 1 | set | |||
| 6.1 | Screw compressor | WS3710 50HH, displacement 5.8M3/min. 1.05Mpa | 2 | set | Sullair | |
| 6.2 | Dryer | Model HDL, rated 0.8-1.0MPa. | 1 | set | ||
| 6.3 | Pre-filter | MPF-250 | 1 | pcs | ||
| 6.4 | Post-filter | MPF-250 | 1 | pcs | ||
| 6.5 | Air tank | THE AIR STORAGE TANK IN THE MACHINE ROOM IS 4 M3, THE REAR GAS TANK OF THE DRILLING PLATFORM IS 2.5M3. | 1 | set | ZPEC | |
| 6.6 | Pipeline assembly | It is composed of a complete set of pipelines and valves from the air source room to each gas equipment, as well as the connecting pipe fittings, safety valves, filters, etc. between the compressors, refrigeration dryers and gas storage tanks in the air source room. • Main wire diameter: 2" • Working pressure: 1.0Mpa. | 1 | set | ZPEC | |
| 7 | Driller control system | 1 | set | |||
| 7.1 | Driller control house | • Driller air control, hydraulic control operation, instrument display, swivel chair, electric heating plate, shouter, single split explosion-proof air conditioner reserved installation position, insulation pad, etc.; • The windows are laminated tempered glass, with wipers, and the indoor electrical explosion proof. • Installation of finger weight meter, rotary tachometer (electronically controlled), turntable torque meter (electronically controlled), type B and hydraulic large caliper torque sensor and meter. | 1 | set | BODA | |
| 7.1.1 | Gauge | It can display the overhang, well depth, drilling pressure, turntable speed and torque, pump punch (3 sets), pump pressure, casing (throttle manifold) pressure, top drive torque and speed, lifting gear torque, mud tank volume (18 sets), mud return percentage, mud inlet and outlet density (1 set each), total hydrocarbon sensor (2 sets), H2S sensor (2 sets), dead rope fixer sensor and parameter sound alarm, there are 2 sets of manager room monitoring and storage equipment, and can be extended to 3 sets, transmitted by wire. It is required that the instrument in the explosion-proof area adopt explosion-proof equipment, and the box in the explosion-proof area adopts explosion-proof box and connector to ensure the real-time reliable transmission and storage of various parameters. | 1 | set | ZPEC | |
| 7.1.2 | Monitoring system | 2 rotatable gimbal cameras mounted on the second floor. One fixed installation is installed in the middle of the horizontal beam of the first section of the derrick for shooting the winch drum. One is installed on the left side of the level beam of the first section of the derrick to photograph the front gate and ramp. Cameras installed on the second floor of the derrick shall not be connected by plug. 4 dynamic 2 static 6 screen display, including all shielded cables. Control system plug-free | 1 | set | ZPEC | |
| 8 | Lighting system | 1 | set | |||
| 8.1 | Lighting system | Used to provide derrick, base, hydraulic station power, oil-water tank farm, pump room area, solid control system, air source room, electromagnetic eddy current brake, etc. lighting and power, cables include: equipment power supply, lighting cable, control cable. Searchlights including front and rear field bases. | 1 | set | ZPEC | |
| 9 | Drill floor tools | 1 | set | |||
| 9.1 | Hydraulic power tongs | • Applicable pipe diameter: 127-203mm • Maximum torque: 125kN.m, requires 7/8 inch hanging rope, length 40 meters at one end to make a chicken heart ring. • Rotate the part to add a shield | 1 | set | ZQ203-125 | RUSHI |
| 9.2 | Hydraulic Cat Head | • Rated Traction Force: 160kN • Rated Flow: 120L/min • Towing Stroke: 1200mm • Tow Rope: 3/4" Filament | 2 | set | YM-16 | RUTONG |
| 9.3 | 5t 5t Air winch | • Load weight: 5t • Working pressure: 0.8MPa • Rope speed: 12 m/s • Wire rope diameter: (1)16mm | 3 | set | QJ-5 | JULING |
| 9.4 | B B Type tongs | • Tail Rope: 7/8" Filament • Strap: 5/8" | 1 | pairs | Q89-432/90 | RUSHI |
| 10 | Auxiliary equipment | 1 | set | |||
| 10.1 | Cable tray | The electric control room to the drilling platform area, the electric control room to the mud pump solid control area | 1 | set | ZPEC | |
| 10.2 | Fuel tank | 45m3 with pump chamber with elliptical gear flow meter (one Y-filter installed on the 2" inlet main, not connected to 2 pumps) | 2 | set | ZPEC | |
| 10.3 | Supply hose | Oil inlet 2", oil return 2" quantity 1, 40 meters each, and the connecting line of the tank. | 1 | set | ZPEC | |
| 10.4 | B B type tongs lifting rope | 5/8"*40m | 2 | pcs | ||
| 10.5 | Hydraulic power tong lifting rope | 7/8"*40m | 1 | pcs | ||
| 10.6 | Clamp tail rope | 7/8" | 1 | set | ||
| 10.7 | Traveling block Suspension rope | • Diameter 1 1/4" | 1 | set | ||
| 10.8 | Safety rope | Pressed 5/8" rope sleeve, SWL = 5ton | 30 | pcs | ||
| 10.9 | Hydraulic shearing rope | 2 | set | YB-48 | ||
| 10.10 | Assembly accessories | 1 | set | ZPEC | ||
| 10.11 | Rig skidding device | Including hydraulic cylinder and control system | 1 | set | ZPEC | |
| 10.12 | Wellhead cover | Steel grating with dimensions of 3.5mx4m | 1 | set | ||
| 10.13 | Drill floor wellhead cover | Patterned steel plate, empty well, 5", 3 1/2" three situations should be equipped | 1 | set | ||
| 10.14 | Drill box | Drill sizes: 30", 26", 17 1/2", 12 1/4", 8 1/2". | 1 | set | ||
| 10.15 | box | Dimensions: 9000mmx2400mmx1200mm | 2 | pcs | ZPEC | |
| 10.16 | Racking board escape device | 2 | pcs | RG10D | MITEMAN | |
| 10.17 | Fall arrest device | 10m-set, 20m-set, 30m two sets | 4 | set | LEQING | |
| 10.18 | crowbar | Two 1.2m sticks, 1.5m two sticks. | 1 | set | ||
| 10.19 | hammer | 5kg two, 10kg two. | 1 | set | ||
| 11 | Add section | 1 | set | |||
| 11.1 | Combustion lines | 1 | set | |||
| 11.1.1 | Combustion lines | 8" diameter, flanged ends with a full set of bolts. 8 inch straight pipe 7 meters 13 pieces, 1 meter 3 pieces, 2 meters 3 pieces. | 100 | ZPEC | ||
| 11.1.2 | Combustion line elbow | 120° elbow, 8" line with underwire flange connection change direction | 6 | ZPEC | ||
| 11.1.3 | Combustion line elbow | 90° elbow, 8" line with steel rim flange connection to change direction | 6 | ZPEC | ||
| 11.2 | Electronic ignition | Vertical type (for the outlet of the exhaust line of the liquid gas separator), including combustion torch and anti-tempering device, to be connected to the 8" exhaust line flange | 1 | |||
| 11.3 | Reverse circulation well pipeline | 2"-10000PSI, from surface gate set to pressure manifold. 2 5.3m short sections, 35m pipeline, 10 elbows, 12 sets of non. | 1 | ZPEC | ||
| 11.4 | Trumpet | With connecting flange, conduit, 12" buckle. 1 pipe with a diameter of 5 meters larger than 350mm, flange (matched with FH35-35) on-site welding. | 1 | set | ZPEC | |
| 11.5 | Trumpet | Including connecting flange, 1 pipeline with a diameter of 5 meters greater than 540mm, flange (compatible with FH54-14) on-site welding. | 1 | set | ZPEC | |
| 11.6 | Drilling water tank | • Tank size: 12000mmX3000mmX2600mm, with fire pump 1. Fire pump (head 216m, flow rate 280m'/h 2, hose: length 2150m, 65mm 3, ©©19mm DC water gun 2 | 1 | pcs | ZPEC | |
| 11.7 | Domestic water tank | Domestic water tank 20m3, leaving 3 2" outlets, without pump. With ball valve | 1 | pcs | ||
| 11.8 | Screw conveyor | Centrifuge No. 2 to shaker No. 1 and extend another 1 section. 3 each, each about 10 meters long. | 3 | pcs | ||
| 11.9 | Rain shelter | Covers the entire solid control system with drainage line. | 1 | set | ZPEC | |
| 11.10 | Cross the axle | Arranged in the remote console and cable | 2 | pcs | ZPEC | |
| 11.11 | The air package is inflated at high pressure |
1-0.27/150,15MPa,L-25m | 1 | pcs | ||
| 11.12 | Well control pipelines | Liquid gas separator to throttle manifold, 5000 PSI | 1 | set | ZPEC | |
| 11.13 | Cementing manifolds | From the catway end through the ramp to the drill table face is connected to the drill platform manifold. 2"-10000PSI. | 1 | set | ZPEC | |
| 11.14 | Material room | 6m container type, including shelves. | 3 | pcs | ZPEC | |
| 12 | On site test and commissioning | 1 | /ppl | |||
| FOB USD | US$ 6,000,000 | |||||
| Notes | ||||||
| 1. Rig will maintain and repaint before delivery, | ||||||
| 2. Rig weight is approx.2300T | ||||||
| 3. Rig quotation is based on FOB. | ||||||
Suppliers with verified business licenses
){kind=link}
){kind=link}