-
Engine Manufacturer
caterpillar
-
Engine Model
C18
-
Rated power/speed (kW/rpm)
571/2100
-
Maximum Milling width(mm)
2300
-
Maximum milling depth(mm)
330
-
Working weight (kg)
44000
XLZ2305C PRODUCT FEATURE
1. The American Caterpillar 571kw twin-turbo electric injection engine is selected, which has strong power and adapts to various high-load crushing and recycling integrated construction conditions.
2. Temperature control independent heat dissipation system: realize fan speed temperature control adjustment, energy saving and consumption reduction.
3. Professional cement crushing rotor, impact resistance, high wear resistance, three-stage crushing mechanism design, to achieve crushing particle size adjustable, to meet the particle size needs of regeneration gradation under different construction conditions.
4. Walk-in engine compartment, easy to reach maintenance and repair points, centralized maintenance area design, shorten maintenance time by 50%, improve maintenance quality.
5. The top air inlet and tail air outlet air duct design are adopted, and the internal temperature of the cabin is effectively reduced to prevent the aging of the internal components of the cabin.
6. Reliable and stable walking track: track length 2050mm, with 350mm wide track shoes, walking more stable.
7. The walking system adopts stepless speed regulation to achieve a fast transition of 0-6km/h per hour.
8. Hydraulic diversion anti-skid system: automatically adjusts the anti-slip form according to the construction speed, which effectively avoids the phenomenon of tire slippage on wet and soft roads.
9. Load control technology, power self-distribution according to different operating loads, to ensure safe and efficient construction.
10. Cruise control system, free hands, worry-free construction.
11. 360-degree panoramic image system: God's perspective, say goodbye to blind spots, and improve work safety.
12. Body attitude control technology, fast attitude adjustment, safe and smooth passage through various rough sections.
13. The new generation leveling system with the built-in sensor of the cylinder can control the milling depth change through the display and the leveling device, which is more convenient to operate.
14. The sprinkler system adopts 600L/min high-flow screw pump and is equipped with a high-precision flow meter to ensure the accuracy of the water content required for construction.
15. 6 tons of large capacity water tank, reduce the frequency of water addition in milling and crushing construction.
16. The maximum ground clearance of the rotor is up to 500mm, which makes it easy to get on and off the scooter.
XLZ2305C Performance Characteristics of Road Cold Recycler
* The milling width of the machine is 2300mm, and the maximum milling depth of one time is 430mm;
* The milling rotor is driven by two sets of 13 belts of automatic tensioning devices; With technology quick change tool holder rotor, the tool installation and disassembly is convenient, the damaged tool can be quickly replaced, which greatly reduces the labor intensity of replacing the tool, prolongs the effective operation time of the machine, and improves the operation efficiency;
* The propulsion system has four gears. Four-wheel walking, four-wheel steering, installed low-pressure wide-base large-pattern tires run smoothly and have large adhesion;
* The spraying system has a sprinkling function, and the spraying system can manually and intelligently control the flow of the spraying medium;
* Automatic depth control: use the built-in sensor of the cylinder for detection, and the milling depth is displayed on the display;
* The intelligent control system of the whole machine can realize the online display, fault diagnosis, fault alarm, maintenance prompt and other advanced functions of the whole machine in working mode and walking mode; At the same time, it can read various data more intuitively through the equipped display;
* Braking system: the whole vehicle adopts four-wheel braking system, the braking is realized by the deceleration mechanism, and the input end of the reducer is equipped with a spring-loaded hydraulic release multi-piece parking brake;
* The lighting system is used for night work, which can make the rear of the machine, the cab, the working edge, and the front of the machine have good lighting;
* With high-pressure cleaning function, the high-pressure cleaning device equipped with the car can clean the dirt attached to the machine at any time;
* The milling drum has a slow rotation function, which can safely replace worn tools;
* Easy maintenance, using hydraulic lifting and turning hood, convenient for machine maintenance and maintenance;
* Optional foamed asphalt device to meet the asphalt layer recycling conditions, wider applicability.
Road Reclaimer XLZ2305C with milling width 2300mm
XLZ2305C road cold recycling machine is a multifunctional road maintenance machine mainly used for the upgrade operations of the used asphalt county and township roads as well as the in-site stabilized soil mixing operations.
XLZ2305C road cold recycling machine is applicable for the mixing of natural soil with filler, cement, and lime to improve the mechanical and physical performances of the soil and for the milling operations of damaged asphalt or asphalt concrete roads in thickness of no higher than 150mm.
In addition, it's also applicable for the in-situ stabilized soil mixing operations for the substrates and roadbeds of the highway, urban road, square, harbor, and parking lot projects.
PARAMETERS
| Item |
Unit
|
|
|
Manufacturer
|
-
|
caterpillar
|
|
Engine Model
|
-
|
C18
|
|
Rated power/speed
|
kW/rpm
|
570.5/2100
|
|
Working speed
|
km/h
|
0-3
|
|
Traveling speed
|
km/h
|
0-12
|
|
Theoretical gradeability
|
%
|
50
|
|
Ground clearance
|
mm
|
350
|
|
Working weight
|
kg
|
44000 |
|
Maximum Milling width
|
mm
|
2300
|
|
Maximum milling depth
|
mm
|
430
|
|
Amount of tools pcs
|
-
|
142
|
|
Rotor diameter
|
mm
|
1320
|
|
Overall dimensions
|
mm
|
9800×3000×3100 |
|
Fuel tank
|
L
|
1500
|
|
Hydraulic oil tank
|
L
|
320
|
|
Water tank
|
L
|
200
|
Pictures show
){kind=link}